Voltage to PWM Converter Module 0-5V/0-10V to 0%-100% Digital Analog

Voltage to PWM Converter Module 0-5V/0-10V to 0%-100% Digital Analog is a module capable of converting voltage to PWM. The voltage analog signal 0 to 10V is converter to PWM digital signal 0%-100%. The output PWM is adjusted by the duty cycle of the entire voltage. V-PWM can convert 0-5V-10V voltage to 0%-100% PWM output, and adjust the PWM duty cycle by adjusting the voltage.

Features:

• Support a wide range of PWM duty cycles, typically ranging from 0% to 100%
• Capable of converting the voltage analog signal within a specified range, such as 0-5V or 0-10V to PWM digital signal 0%-100%
• High resolution and accuracy in converting the analog voltage to an PWM signal.
• Eliminate any potential noise or fluctuations in the PWM signal
• Module should have protection mechanisms to guard against overvoltage, overcurrent, and other potential electrical faults occur during operation

Specifications:

• Working voltage: DC 5V-12V
• Output PWM frequency : about 50KHZ
• PWM amplitude : 5V
• Conversion range: 0%-100% PWM
• Voltage conversion: 0-5V/0-10V
• Tolerance: 1%-3%
• Dimension: 31x33mm
• Weight: 10g

Pin description:

• VCC: Working power supply 5V-12V.
• GND: working power ground
• VIN: input voltage 0-10V
• GND: Input signal negative terminal.
• GND: Output PWM ground.
• PWM: output PWM

Instructions for use:

• Connect the working voltage to VCC and GND. Do not connect them in reverse to avoid damage to the board and devices. Connect a controllable voltage at the VIN terminal.
• The voltage range is divided into two types: 0-5V and 0-1 0V according to the selected mode. The PWM output is PWM. The duty cycle can be adjusted by adjusting the voltage. The accuracy can be controlled by adjusting the potentiometer

Package Includes:

• 1 x Voltage to PWM Converter Module 0-5V/0-10V to 0%-100% Digital Analog