Hi-Link HLK-PM03 3.3V 3W AC-DC Power Supply Module is a plastic enclosed PCB mounted isolated switching step-down power supply module. Hi-Link 3.3V 3W SMPS can supply 3.3V DC from 120V AC – 230V AC and has a power rating of 3 Watt.
This makes it perfect for small projects that need a 3.3 volt supply from mains. There are many advantages to these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation, etc.
This HLK-PM03 AC DC converter voltage source is a switching source, so you do not have to worry about fluctuations in voltage grid. It is considered designing to mount on the PCB and is the ideal solution to power pads that you take.
Features:
- Ultra-thin, ultra-small 230V to 3.3V power supply module
- All voltage input (AC: 90 ~ 245V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- The product is designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
- 100% load aging and testing
- Good output short circuit and over current protection and automatic recovery
- Input/output isolation withstand 3000Vac
- Adopt high quality environmental protection waterproof and heat conducting glue to seal, moisture proof, vibration proof
- It can be used in industrial, commercial and civil fields
Specifications:
- AC Input Voltage Range: 90 ~ 264V
- Output DC Voltage: 3.3V
- Input Low Voltage Efficiency: Vin=110VAc, Output full-load: 69%
- Input High Voltage Efficiency: Vin=220VAc, output full-load: 70%
- Load rated output voltage: +3.3±0.1
- Short-term maximum output current: 1000mA
- The maximum output current for a long time:: 600mA
- Operating Temperature:: -20 to +60°C
- Store Temperature: -40 to +80°C
- Relative humidity: 5 to 95%
- Input current surge: <10A
- Maximum input current: <0.2A
- Voltage Regulation: ±0.2 %
- Load Regulation: ±0.5 %
- Dimensions in mm (LxWxH): 33 x 19 x 15
- Weight(gm): 22
- Color: Black
Environment Condition
- Operation Temperature : -20 to +60 ℃
- Store Temperature : -40 to +80 ℃
- Relative humidity : 5 to 95 %
- Cooling way : Cooling by radiation
- Atmospheric pressure : 80 to 106 Kpa
- Sea level elevation : ≤2000 m
- Vibration : Vibration coefficient 10~500Hz, 2G 10 min./1 cycle, 60min. each along X,Y,Z axes
Advantages:
There are many advantages for these module, such as low temperature rise, low power, high efficiency, high reliability, high security isolation etc. HLK PM03 3.3V power module is widely used in smart home, automation and control, communication equipment, instrumentation and other industries.
Package Includes:
- 1 x Hi-Link HLK-PM03 3.3V 3W AC-DC Power Supply Module

RDM6300 125KHz EM4100 RFID Card ID Reader Module
5V 16 Channel Optocoupler Relay Board Module LM2576 Power Supply
TDA2030 Audio Amplifier Module 18W 6-12V
NodeMCU ESP8266 LUA Amica WiFi Development Board with CP2102 USB-Serial Interface
WeMos D1 R2 WiFi ESP8266 Development Board Arduino Compatible
Pulse Sensor Amped Heart Rate Sensor Module
Sharp GP2Y0A41SK0F Analog Distance Sensor 4-30cm
BH1750 Light intensity Sensor Module
STM8S 8L TSSOP20 Burning Testing Holder Downloader Offline Programmer
Raspberry Pi 8 channel Level Switching (3.5V to 5V) IO Module
KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
USB ASP AVR Programmer Downloader with Cable for ATMEL Processors
Robotics DPDT Switch Box Enclosure
2WD 2 Wheel Transparent Robot Motor Chassis Kit for Arduino
12V 2A DC Power Supply Adapter
12V 10A 8-Channel OptoCoupler Relay Board Module
12V 1 Channel 10A Relay Module
12V 4-Channel Optocoupler Relay board Module
Active Buzzer Alarm Module DC 3.3-5V
12V 16 Channel Optocoupler Relay Board Module LM2576 Power Supply
Prototype Shield V3.0 For Arduino Mega with breadboard
Arduino Uno R3 Development Board
Nano 328P Expansion Adapter Breakout Board IO Shield
XT60 Connector Male-Female Pair for LiPo Battery








Reviews
There are no reviews yet.