Voltage to PWM Converter Module 0%-100% to 0-5V/0-10V for Digital Analog

Voltage to PWM Converter Module 0%-100% to 0-5V/0-10V for Digital Analog is a module capable of converting voltage and PWM. The PWM digital signal is converted into 0 to 10V analog signal. The output voltage is adjusted by the duty cycle of the entire PWM. V-PWM can convert 0-5V-10V voltage to 0%-100% PWM output, and adjust the PWM duty cycle by adjusting the voltage.

Features:

• Support a wide range of PWM duty cycles, typically ranging from 0% to 100%
• Capable of converting the PWM signal into an analog voltage within a specified range, such as 0-5V or 0-10V
• High resolution and accuracy in converting the PWM signal to an analog voltage
• Eliminate any potential noise or fluctuations in the PWM signal
• Module should have protection mechanisms to guard against overvoltage, overcurrent, and other potential electrical faults occur during operation

Specifications:

Working voltage	DC 5V-12V
Output PWM frequency	about 50KHZ
PWM amplitude	5V
Conversion range	0-5V/0-10V
Voltage conversion	0%-100% PWM
Tolerance	1%-3%
Dimension	31x33mm
Weight	10g

 

Pin description:

• VCC: Working power supply 5V-12V.
• GND: working power ground
• VIN: input voltage 0-10V
• GND: Input signal negative terminal.
• GND: Output PWM ground.
• PWM: output PWM

Instructions for use:

• Connect the working voltage to VCC and GND. Do not connect them in reverse to avoid damage to the board and devices. Connect a controllable voltage at the VIN terminal. The voltage range is divided into two types: 0-5V and 0-1 0V according to the selected mode. The PWM output is PWM. The duty cycle can be adjusted by adjusting the voltage. The accuracy can be controlled by adjusting the potentiometer

Package Includes:

• 1 x Voltage to PWM Converter Module 0%-100% to 0-5V/0-10V for Digital Analog