MT3608 2A Max DC-DC Step Up Power Boost Module

MT3608 2A Max DC-DC Step Up Power Boost Module is a DC-DC boost converter for budget that takes input voltage from as low as 2V to an output as high as 28VDC. This module has Input = 2-24V / Out = 5-28V @ 2A Switching Regulator (Boost = Output Voltage has to be higher than input voltage) which is good for getting stable 3.3V or 5V output from 1xAA or 2xAA cells or Li-ion batteries.

Features :

• It’s efficient by up to 93%.
• It can source a good amount of current.
• It is an inexpensive converter module.
• It’s simple to adjust to get your desired increase in voltage.

• Input Voltage (V): 2 ~ 24
• Output Voltage(V): 5 ~ 28
• Output Current(A): 2
• Operating Temperature (°C): -40 to +90
• Efficiency: 0.93
• Length (mm): 36
• Width (mm): 17
• Height (mm): 7
• Weight (gm): 4

Module Connections

• VIN+ =      Input Voltage
• VIN- =       Ground
• VOUT+ = Output Voltage
• VOUT- =  Ground.  Connected to VIN- on the module.

How to use

• Connect the the IN and IN- of the module with 2~24V
• Adjust the potentiometer to adjust the output voltage.

Voltage Adjustment:

• The module has a single-turn potentiometer for adjustment of the output voltage.
• Turning the pot CW decreases the output voltage while turning it  CCW increases the output voltage.
• The upper limit of the adjustment range will depend on the input voltage and the load.  With a 9V input for instance, at 1A, the upper voltage limit will be approximately 20V.

Package Includes:

• 1 x MT3608 2A Max DC-DC Step Up Ultra Small Power Module

Note:

• The input voltage should not exceed the maximum input voltage.
• Peak current output current is not more than 2A for input & output.
• Please be noted that the output voltage should be higher than the input voltage.