ELM327 OBD2 V2.1 Bluetooth Interface Auto Car Diagnostic Scanner

ELM327 OBD2 V2.1 Bluetooth Interface Auto Car Diagnostic Scanner an on-Board Diagnostics, or OBD, in an automotive context, is a generic term referring to a vehicle’s self-diagnostic and reporting capability. OBD systems give the vehicle owner or a repair technician access to the state of health information for various vehicle sub-systems.

The amount of diagnostic information available via OBD has varied widely since the introduction in the early 1980s of on-board vehicle computers, which made OBD possible. Early instances of OBD would simply illuminate a malfunction indicator light, or MIL, if a problem was detected—but would not provide any information as to the nature of the problem.

Modern OBD implementations use a standardized digital communications port to provide real-time data in addition to a standardized series of diagnostic trouble codes, or DTCs, which allow one to rapidly identify and remedy malfunctions within the vehicle.

ELM327 Bluetooth CAN-BUS scan tool supports OBD-II protocols. It is used to read & diagnose trouble codes, clear trouble codes and detect fuel pressure and so on.

The Elm327-Bluetooth adapter gives you the opportunity to “spy” on your car wirelessly. Convert your PC, PDA, Mobile to a diagnostic tool and monitor all critical information of the car’s ECU. The Elm327-Bluetooth is an adapter that connects to the car’s network and then creates a virtual cable between the adapter and the PC that it is connected. With the help of various open source application for the Elm327, you can have a digital gauge or an advanced. diagnostic system and a powerful performance measurement toll in your screen.

Features:

• Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
• Clear trouble codes and turn off the MIL (“Check Engine” light).

Specifications:

Support OBD-II protocols	ISO15765-4 (CAN) ISO14230-4 (KWP2000) ISO9141-2 J1850 VPW J1850 PWM
Color	Back + Orange + Blue
Dimensions (LxWxH) mm	8.2 x 4.6 x 2.5cm
Weight(gm)	45

Bluetooth ELM 327 Functions:

• Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
• Clear trouble codes and turn off the MIL (“Check Engine” light)

Display current sensor data, including: 

• Engine RPM
• Calculated Load Value
• Coolant Temperature
• Fuel System Status
• Vehicle Speed
• Short Term Fuel Trim
• Long Term Fuel Trim
• Intake Manifold Pressure
• Timing Advance
• Intake Air Temperature
• Air Flow Rate
• Absolute Throttle Position
• Oxygen sensor voltages/associated short term fuel trims
• Fuel System status
• Fuel Pressure

Package Includes:

• 1 x Bluetooth ELM327 device
• 1 x CD with software & Drivers