Arduino Uno R3 Board with Atmega328p
The Arduino Uno is a micro-controller board based on the? ATmega328. It has 14 digital input/outputpins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16? MHz?ceramic resonator, a USB connection, a power jack, an ICSP header, and areset button. It contains everything needed to support the micro-controller;simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started .
- Microcontroller: ATmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
- 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
- Stronger RESET circuit.
- Atmega 16U2 replace the 8U2.